Penelitian Durabilitas Minyak Lumas Mesin Sepeda Motor Sae 10w-40, Api Sl/Jaso Mb Melalui Uji Jalan

Rona Malam Karina, M. Hanifuddin, Setyo Widodo

Sari


Penggunaan minyak lumas yang tepat akan berpengaruh pada kinerja mesin yang baik, sehingga masa pakai mesin kendaraan lebih lama dan meningkatkan efi siensi secara keseluruhan. Penelitian ini dilakukan dengan cara membuat minyak lumas untuk kendaraan sepeda motor SAE 10W 40, API SL/JASO MB yang memerlukan spesifi kasi khusus dengan kinerja yang optimum, kemudian melakukan uji jalan sampai mencapai jarak tempuh 5000 km. Analisis minyak lumas bekas (used oil) dilakukan untuk mengetahui unjuk kerja minyak lumas dan pengaruh pemakaiannya terhadap komponen mesin. Hasil analisis menunjukkan bahwa minyak lumas bekas mesin sepeda motor hasil formulasi, hasilnya masih di bawah nilai batas toleransinya, sehingga dapat disimpulkan bahwa durabilitas minyak lumas hasil formulasi ML-F mampu digunakan sampai jarak tempuh 5000 km.


Kata Kunci


minyak lumas; sepeda motor; uji jalan

Teks Lengkap:

PDF

Referensi


B. Rahimi, A. Semnani, A. Nezamzadeh-Ejhieh, H.S.

Langeroodi, M.H.Davood, 2012, “Monitoring of

the Physical and Chemical Properties of a Gasoline

Engine Oil during Its Usage”, Journal of Analytical

Methods in Chemistry 1-8.

Carden, P.; Pisani, C.; Andersson, J.; Field, I.;

Lainé, E.; Bansal, J.; Devine, M., 2013, “The

Effect of Low Viscosity Oil on the Wear”, Friction

and Fuel Consumption of a Heavy Duty Truck

Engine. SAE Int. J. Fuels Lubr., 6, 311–319.

Fein, Richard S., 1992, Liquid Lubricants, ASTM

Handbook vol.18 Friction, Lube and Wear Test,

ASM International, USA, p:82-87.

Fitch, E. C., 1992, “Proactive Maintenance for

Mechanical Systems”, Elsevier Science Pulblishers.

G. C. Ofunne, A. U. Maduako, C. M. Ojinnaka,

, “Studies on the Ageing Characteristics

of Automotive Crankcase Oils, Tribology

International, VOL. 22 No. 6, pg. 401-404.

J. Kral jr, B. Konecny, J. Kral, K. Madac, G.

Fedorko, V. Molnar, 2014, “Degradation and

chemical change of longlife oils following intensive

use in automobile engines”, Measurement, IJETAE

(2014) 34-42. ISSN 2250-2459, ISO 9001:2008

Certifi ed Journal, Volume 4, Issue 12, December.

JASO Engine Oils Standard, Implementation Panel,

, “Motorcycles – Four-Stroke Cycle Gasoline

Engine Oils (JASO T 903:2011)”, April, 1999

(Revised May, 2011).

John, E., 2008, “Effects of Temperature on Engine

Lubricating Oil”, Wearcheck Technical

Bulletin, 43: 2-5.

K. Holmberg, P. Andersson and A. Erdemir, 2012,

“Global Energy Consumption Due to Friction in

Passenger Cars,” Tribology International, vol. 47,

pp. 221234,

Keputusan Menteri Energi dan Sumber Daya

Mineral Nomor: 2808 K/20/MEM/2006, tanggal

Nopember 2006, tentang Standar dan Mutu

(spesefi kasi) pelumas yang Dipasarkan di dalam

Negeri. M.H. Jayed *, H.H. Masjuki, R. Saidur,

M.A. Kalam, M.I. Jahirul, “Environmental aspects

and challenges of oilseed produced biodiesel in

Southeast Asia”, Renewable and Sustainable

Energy Reviews 13 (2009) 2452–2462.

Malam Karina, R, 2002, “Penelitian Drain Interval

Minyak Lumas Monograde melalui Uji Jalan”,

Majalah Lembaran Publikasi LEMIGAS, Vol. 36.

No. 3/2002.

Mohamed S. Al-Nozili, Fathy A. Abeed, Majed. M.

Ahmed, 2014, “Evaluation of the Lubricating Oil’s

Optimal Drain Interval for Petrol Public Transport

Means at the Local Operating Conditions” IJETAE,

Volume 4, Issue 12, December 2014, ISSN 2250-

, ISO 9001:2008 Certifi ed Journal.

M.S. Stark, J.J. Wilkinson, P.M. Lee, J.R. Lindsay

Smith, M. Priest, R.I. Taylor, S. Chung, 2005,

“The degradation of lubricants in gasoline engines:

Lubricant flow and degradation in the piston

assembly”, in: M.P. D. Dowson (Ed.) Tribology and

Interface Engineering Series, Elsevier, pp. 779-786.

N. Tippayawong, P. Sooksarn, 2010, “Assessment

of lubricating oil degradation in small motorcycle

engine fueled with gasohol”, Maejo Int. J. Sci.

Technol, 4 (2010) 201-209 .

P. Shayler, A. Allen, D. Leong, I. Pegg, A. Brown and

J. Dumenil, 2007, “Characterizing Lubricating Oil

Viscosity to Describe Effects on Engine Friction,”

SAE Technical Paper, no. 2007-01-1984, 2007.

Paul, F., 2006, “Better Onsite Maintenance Through

Fuel and Lubricating Oil Viscosity Management”,

Kittiwake Developments Ltd. P. Jost, “Tribology:

How a Word was Coined 40 Years Ago,”

Tribology and Lubrication Technology, pp. 24-

, March 2006.

Skjoedt, M.; Butts, R.; Assanis, D.; Bohac, S., 2008,

“Effects of oil properties on spark-ignition gasoline

engine friction”. Tribol. Int. 2008, 41, 556–563.

Sylvain, V., 2008, “A Critical Approach To Viscosity

Index”, Science And Technology Technology Of

Fuel And Energy Journal, 11: 2199-2200.

Peraturan Menteri Energi dan Sumber Daya

Mineral Nomor: 053 tahun 2006, tanggal 6

Nopember 2006, tentang Wajib Daftar Pelumas

yang Dipasarkan di dalam Negeri

Petro-Canada Lubricants, 2013, “Lubricants

Handbook, Beyond today’s Standard”, Published

Date, January 2013.

Sander, D.; Allmaier, H.; Priebsch, H.; Reich, F.;

Witt, M.; Füllenbach, T.; Skiadas, A.; Brouwer,

L.; Schwarze, H., 2015, “Impact of high pressure

and shear thinning on journal bearing friction”,

Tribol. Int., 81, 29–37.

Stephen M. Hsu, 2004, “Molecular basis of

lubrication”, Tribology International 37, p.

–559, National Institute of Standards and

Technology, Gaithersburg, MD 20899, USA

T. Miller, 2010 “The Road to Improved Heavy Duty

Fuel Economy,” Directions in Engine-Effi ciency

and Emissions Research.




DOI: https://doi.org/10.29017/LPMGB.50.1.299