Optimization of Chemicaly Activated Candlenut and Walnut Shell Biosorbents for Produced Water Purification Within an Iot-Based Monitoring System
DOI:
https://doi.org/10.29017/scog.v49i2.1972Keywords:
biosorption, produced water, chemical activation, walnut shell, IoT monitoring, sustainable water treatmentAbstract
Produced water from petroleum operations contains high levels of hydrocarbons, suspended solids, and dissolved contaminants that must be treated before discharge or reuse. This study aims to optimize biosorbents derived from candlenut and walnut shells through chemical activation using potassium hydroxide (KOH) for the purification of produced water. In addition, an Internet of Things (IoT)-based monitoring system was integrated to enable real-time assessment of water quality parameters. The biosorbents were characterized using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) to identify surface functional groups and morphological modifications. Experimental evaluations of turbidity, bulk density, and total dissolved solids (TDS) were conducted under various operating conditions. The activated biosorbents exhibited enhanced hydroxyl and carboxyl functional groups, as confirmed by FTIR, with an optimal bulk density of 0.76 g/cm³. Under optimum conditions (pH 7, contact time 90 min, adsorbent dosage 15 g/L), turbidity and TDS removals reached 80% and 75%, respectively. The IoT system successfully enabled real-time data acquisition and process monitoring, ensuring operational reliability. The maximum adsorption capacity based on the Langmuir model reached 33.8 mg/g for KOH-activated walnut and 31.2 mg/g for candlenut biosorbent. Overall, the chemically activated candlenut and walnut biosorbents demonstrated excellent adsorption capacity and potential for sustainable produced water treatment. This approach offers an environmentally friendly and cost-effective solution by utilizing local biomass waste integrated with modern IoT-based control technologies. Adsorption behavior was further evaluated using Langmuir/Freundlich isotherm and kinetic models.
References
Abaide, E.R. et al., 2019. ‘Adsorption of 2–nitrophenol using rice straw and rice husks hydrolyzed by subcritical water’, Bioresource Technology, 284, pp. 25–35. Available at: https://doi.org/https://doi.org/10.1016/j.biortech.2019.03.110.
Abdul Hamid, S.B., Chowdhury, Z.Z. and Zain, S.M., 2014. ‘Base catalytic approach: A promising technique for the activation of biochar for equilibrium sorption studies of Copper, Cu(II) ions in single solute system’, Materials, 7(4), pp. 2815–2832. Available at: https://doi.org/10.3390/ma7042815.
Afdhol, M.K., Juneid, A.Z., et al., 2025. ‘Optimization of a Produced Water Filtration System Using Zinc Chloride-Activated Candlenut Adsorbent and Internet of Things Integration’, IOP Conference Series: Earth and Environmental Science, 1521(1), p. 12027. Available at: https://doi.org/10.1088/1755-1315/1521/1/012027.
Afdho, M. K., Saputri, R. L., Juneid, A. Z., Nordin, R. M., Zakaria, M. S. B., & Erfando, T. (2025). Utilization of Jenitri as A Bioadsorbent in Petroleum Field-Produced Water. Scientific Contributions Oil and Gas, 48(1), 217-231. https://doi.org/10.29017/scog.v48i1.1734
Al-Masri, M.S. et al., 2021. ‘Treatment of produced water using walnut shell for 226Ra removal’, Journal of Radioanalytical and Nuclear Chemistry, 329(2), pp. 795–804. Available at: https://doi.org/10.1007/s10967-021-07863-0.
Aldabagh, I.S. and Hummadi, K.K., 2024. ‘Effectiveness and analysis of synthesis nanoparticles walnut shells/zinc oxide to reduce trimethoprim from aqueous solutions’, Case Studies in Chemical and Environmental Engineering, p. 100674. Available at: https://doi.org/https://doi.org/10.1016/j.cscee.2024.100674.
Alshami, A. et al., 2024. ‘IoT Innovations in Sustainable Water and Wastewater Management and Water Quality Monitoring: A Comprehensive Review of Advancements, Implications, and Future Directions’, IEEE Access, 12, pp. 58427–58453. Available at: https://doi.org/10.1109/ACCESS.2024.3392573.
Arora, C. et al., 2020. ‘Scanning Electron Microscopy: Theory and Applications’, Essential Techniques for Medical and Life Scientists: A Guide to Contemporary Methods and Current Applications- Part II [Preprint]. Available at: https://doi.org/10.2174/9789811464867120010009.
Asuquo, E. et al., 2017. ‘Adsorption of Cd(II) and Pb(II) ions from aqueous solutions using mesoporous activated carbon adsorbent: Equilibrium, kinetics and characterisation studies’, Journal of Environmental Chemical Engineering, 5(1), pp. 679–698. Available at: https://doi.org/10.1016/J.JECE.2016.12.043.
Badawi, M. et al., 2017. ‘Adsorption of aluminum and lead from wastewater by chitosan-tannic acid modified biopolymers: Isotherms, kinetics, thermodynamics and process mechanism.’, International journal of biological macromolecules, 99, pp. 465–476. Available at: https://doi.org/10.1016/j.ijbiomac.2017.03.003.
Bamisaye, A. et al., 2023. ‘Kinetic and mechanistic study of the biosorption of Copper(II) Ion from wastewater using porous Chitosan-Walnut shell composite’, Chemical Data Collections, 45, p. 101024. Available at: https://doi.org/https://doi.org/10.1016/j.cdc.2023.101024.
Campiñez, M.D., Casas, M. and Caraballo, I., 2016. ‘Characterisation of the Ability of Carbamazepine for Processing It through Direct Compression Applying the New Expert System SeDeM International Journal of Clinical Pharmacology & Pharmacotherapy Characterisation of the Ability of Carbamazepine for Proces’, International Journal of Clinical Pharmacology & Pharmacotherapy, (May), pp. 1–6. Available at: https://doi.org/10.15344/2456-3501/2016/105.
Chávez-Miyauchi, T., Firoozabadi, A. and Fuller, G., 2016. ‘Nonmonotonic Elasticity of the Crude Oil-Brine Interface in Relation to Improved Oil Recovery.’, Langmuir : the ACS journal of surfaces and colloids, 32 9, pp. 2192–2198. Available at: https://doi.org/10.1021/acs.langmuir.5b04354.
Chia, Y.Y. and Yoon, L.W., 2018. ‘Investigation of palm fibre-derived activated carbon in wastewater treatment’, Journal of Engineering Science and Technology, 13(Special Issue on the eighth eureca 2017), pp. 52–66.
Cristóbal García-García, J. et al., 2018. ‘Exergy Analysis of an Extractive Distillation Column for Reducing Energy Consumption in a Bioethanol Production Process’, in A. Friedl et al. (eds) 28 European Symposium on Computer Aided Process Engineering. Elsevier, pp. 513–518. Available at: https://doi.org/https://doi.org/10.1016/B978-0-444-64235-6.50091-7.
Dua, S., 2025. ‘Exploring the experiences of oil and gas industry executives in embracing industry 4.0: Insights, challenges, and strategies’, Computers & Industrial Engineering, 208, p. 111377. Available at: https://doi.org/https://doi.org/10.1016/j.cie.2025.111377.
Enache, A.C. et al., 2023. ‘An Eco-Friendly Modification of a Walnut Shell Biosorbent for Increased Efficiency in Wastewater Treatment’, Sustainability (Switzerland), 15(3). Available at: https://doi.org/10.3390/su15032704.
Enad, H.Y. and Jaeel, A.J., 2019. ‘Water quality index of Tigris River on Waist Governorate for aquatic life’, IOP Conference Series: Materials Science and Engineering, 584(1), p. 12029. Available at: https://doi.org/10.1088/1757-899X/584/1/012029.
Fakhru’l-Razi, A. et al., 2009. ‘Review of technologies for oil and gas produced water treatment’, Journal of Hazardous Materials, 170(2), pp. 530–551. Available at: https://doi.org/https://doi.org/10.1016/j.jhazmat.2009.05.044.
Forhad, H.M. et al., 2024. ‘IoT based real-time water quality monitoring system in water treatment plants (WTPs)’, Heliyon, 10(23), p. e40746. Available at: https://doi.org/https://doi.org/10.1016/j.heliyon.2024.e40746.
Gangwar, A. et al., 2025. ‘Current advances in produced water treatment technologies: a perspective of techno-economic analysis and life cycle assessment’, Environment, Development and Sustainability, 27(7), pp. 15077–15111. Available at: https://doi.org/10.1007/s10668-024-04558-w.
Garba, Z.N. and Rahim, A.A., 2016. ‘Evaluation of optimal activated carbon from an agricultural waste for the removal of para-chlorophenol and 2,4-dichlorophenol’, Process Safety and Environmental Protection, 102, pp. 54–63. Available at: https://doi.org/10.1016/j.psep.2016.02.006.
Guerrero-Pérez, M.O. and Patience, G.S., 2020. ‘Experimental methods in chemical engineering: Fourier transform infrared spectroscopy—FTIR’, Canadian Journal of Chemical Engineering, 98(1), pp. 25–33. Available at: https://doi.org/10.1002/cjce.23664.
Halysh, V. et al., 2022. ‘Efficient Biosorbents for Wastewater Treatment: Preparation, Characterization, Utilization’, Journal of Chemical Technology and Metallurgy, 57(2), pp. 302–309.
Ibrahim, M. et al., 2023. ‘Advances in Produced Water Treatment Technologies: An In-Depth Exploration with an Emphasis on Membrane-Based Systems and Future Perspectives’, Water (Switzerland), 15(16). Available at: https://doi.org/10.3390/w15162980.
Indrasari, W. et al., 2019. ‘Measurement of water polluted quality based on turbidity, pH, magnetic property, and dissolved solid’, Journal of Physics: Conference Series, 1317(1), p. 12060. Available at: https://doi.org/10.1088/1742-6596/1317/1/012060.
Koul, B. et al., 2022. ‘Application of Natural Coagulants in Water Treatment ’:, water [Preprint].
Leng, L. et al., 2021. ‘An overview on engineering the surface area and porosity of biochar’, Science of The Total Environment, 763, p. 144204. Available at: https://doi.org/https://doi.org/10.1016/j.scitotenv.2020.144204.
Liu, Y. et al., 2021. ‘A review of treatment technologies for produced water in offshore oil and gas fields.’, The Science of the total environment, 775, p. 145485. Available at: https://doi.org/10.1016/j.scitotenv.2021.145485.
Masuku, M. et al., 2024. ‘Pinecone biochar for the Adsorption of chromium (VI) from wastewater: Kinetics, thermodynamics, and adsorbent regeneration’, Environmental Research, 258, p. 119423. Available at: https://doi.org/https://doi.org/10.1016/j.envres.2024.119423.
Mukai, Y. et al., 2021. ‘Quantum Fourier-Transform Infrared Spectroscopy for Complex Transmittance Measurements’, Physical Review Applied [Preprint]. Available at: https://doi.org/10.1103/PHYSREVAPPLIED.15.034019.
Najafi Saleh, H. et al., 2018. ‘Data on the acid black 1 dye adsorbtion from aqueous solutions by low-cost adsorbent- Cerastoderma lamarcki shell collected from the northern coast of Caspian Sea’, Data in Brief, 17, pp. 774–780. Available at: https://doi.org/https://doi.org/10.1016/j.dib.2018.01.107.
Nayak, A.K. and Pal, A., 2021. ‘Enhanced adsorption of gentian violet dye from water using lignocellulosic agricultural waste modified with di- and tri-carboxylic acids: Artificial intelligence modeling, practical comprehension, mechanistic and regeneration analyses’, Journal of Environmental Chemical Engineering, 9(4), p. 105578. Available at: https://doi.org/https://doi.org/10.1016/j.jece.2021.105578.
Omran, B.A. and Baek, K.-H., 2022. ‘Valorization of agro-industrial biowaste to green nanomaterials for wastewater treatment: Approaching green chemistry and circular economy principles’, Journal of Environmental Management, 311, p. 114806. Available at: https://doi.org/https://doi.org/10.1016/j.jenvman.2022.114806.
Osman, A.I. et al., 2023. Methods to prepare biosorbents and magnetic sorbents for water treatment: a review, Environmental Chemistry Letters. Springer International Publishing. Available at: https://doi.org/10.1007/s10311-023-01603-4.
Pajooheshfar, S.P. and Saeedi, M., 2009. ‘Adsorptive Removal of Phenol from Contaminated Water and Wastewater by Activated Carbon, Almond, and Walnut Shells Charcoal’, Water Environment Research, 81(6), pp. 641–648. Available at: https://doi.org/https://doi.org/10.2175/106143008X390780.
Pamidimukkala, P.S. and Soni, H., 2018. ‘Efficient removal of organic pollutants with activated carbon derived from palm shell: Spectroscopic characterisation and experimental optimisation’, Journal of Environmental Chemical Engineering, 6(2), pp. 3135–3149. Available at: https://doi.org/https://doi.org/10.1016/j.jece.2018.04.013.
Pasika, S. and Gandla, S.T., 2020. ‘Smart water quality monitoring system with cost-effective using IoT’, Heliyon, 6(7), p. e04096. Available at: https://doi.org/10.1016/j.heliyon.2020.e04096.
Rashidi, N.A. and Yusup, S., 2017. ‘Potential of palm kernel shell as activated carbon precursors through single stage activation technique for carbon dioxide adsorption’, Journal of Cleaner Production, 168, pp. 474–486. Available at: https://doi.org/https://doi.org/10.1016/j.jclepro.2017.09.045.
Saputri, R. L., Afdhol, M. K., Erfando, T., Hidayat, F., & Nordin, R. M. (2025). Bio-Sorbent Optimisation Through Chemical Activation in The Processing of Waste Water in The Oil and Gas Sector. Scientific Contributions Oil and Gas, 48(2), 193-205. https://doi.org/10.29017/scog.v48i2.1769
Stanford, C.A. et al., 2020. ‘Use of nanoadvanced activated carbon, alumina and ferric adsorbents for humics removal from water: isotherm study’, Emergent Materials, 3(6), pp. 841–856. Available at: https://doi.org/10.1007/s42247-020-00083-4.
Sugiarti, Rohaningsih, D. and Aisyah, S., 2023. ‘Study of Total Dissolved Solids (TDS) and Total Suspended Solids (TSS) in Estuaries in Banten Bay Indonesia’, IOP Conference Series: Earth and Environmental Science, 1201(1), p. 12045. Available at: https://doi.org/10.1088/1755-1315/1201/1/012045.
Sulistiyanto, Setyobudi, R. and Tijaniyah, 2023. ‘Utilization of tds sensors for water quality monitoring and water filtering of carp pools using IoT’, EUREKA: Physics and Engineering, pp. 69–77. Available at: https://doi.org/10.21303/2461-4262.2023.002865.
Sulyman, M. et al., 2021. ‘Development, characterization and evaluation of composite adsorbent for the adsorption of crystal violet from aqueous solution: Isotherm, kinetics, and thermodynamic studies’, Arabian Journal of Chemistry, 14(5), p. 103115. Available at: https://doi.org/https://doi.org/10.1016/j.arabjc.2021.103115.
Suo, F. et al., 2019. ‘Mesoporous activated carbon from starch for superior rapid pesticides removal’, International Journal of Biological Macromolecules, 121, pp. 806–813. Available at: https://doi.org/https://doi.org/10.1016/j.ijbiomac.2018.10.132.
Waqar, A. et al., 2023. ‘Impediment to implementation of Internet of Things (IOT) for oil and gas construction project Safety: Structural equation modeling approach’, Structures, 57, p. 105324. Available at: https://doi.org/https://doi.org/10.1016/j.istruc.2023.105324.
Wulandari, M. et al., 2024. ‘Case Studies in Chemical and Environmental Engineering Hydroisomerization of n-dodecane over zeolite socony mobile-48- γ -Al 2 O 3 supported platinum catalyst : Insight into platinum concentration and reaction temperature’, 10(May).
Wulandari, M., Nofrizal, N. and Sulaiman, S.A.S., 2023. ‘a Novel Approach of Using Bamboo Root Cellulose: an Alternative for Iron(Ii) Removal From Wastewater’, Rasayan Journal of Chemistry, 16(2), pp. 921–929. Available at: https://doi.org/10.31788/RJC.2023.1628307.
Wulandari, M., Syamsudin, N. and Sulaiman, S.A.S., 2022. ‘Tea Waste Products: A New Low-Cost and Green Adsorbent Alternative for Rhodamine-B Dye Removal’, Indonesian Journal of Chemistry, 22(6), pp. 1612–1625. Available at: https://doi.org/10.22146/ijc.75739.
Xie, M. et al., 2019. ‘Synthesis and evaluation of benzyl methacrylate-methacrylate copolymers as pour point depressant in diesel fuel’, Fuel, 255, p. 115880. Available at: https://doi.org/https://doi.org/10.1016/j.fuel.2019.115880.
Yuliusman, Afdhol, M.K. and Sanal, A., 2018. ‘Carbon monoxide and methane adsorption of crude oil refinery using activated carbon from palm shells as biosorbent’, in IOP Conference Series: Materials Science and Engineering. Available at: https://doi.org/10.1088/1757-899X/316/1/012016.
Zhao, C. et al., 2020. ‘Highly enhanced adsorption performance of tetracycline antibiotics on KOH-activated biochar derived from reed plants’, RSC Advances, 10(9), pp. 5066–5076. Available at: https://doi.org/10.1039/c9ra09208k.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Copyright by Authors. Published by LEMIGAS

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.









