The Significance of Nanofluids as Working Fluids in Energy Extraction Process on Geothermal Heat Exchanger System Utilizing Abandoned Oil Wells: A Review
DOI:
https://doi.org/10.29017/scog.v49i1.1815Keywords:
geothermal, nanoparticle, nanofluid, thermal performanceAbstract
Geothermal energy offers significant potential as an environmentally friendly renewable resource; however, large-scale deployment remains constrained by high drilling and infrastructure costs. Repurposing abandoned oil and gas wells as geothermal heat exchanger systems has emerged as a promising alternative, yet research on the application of nanofluids in such systems remains limited and fragmented. This review employs a narrative synthesis approach to analyze more than 80 peer-reviewed studies related to wellbore geothermal heat exchangers, working fluids, and nanofluid thermal enhancement mechanisms. The review identifies a clear knowledge gap regarding the integration of nanofluids into geothermal heat extraction processes in deep coaxial and U-tube systems, particularly with respect to long-term stability, pressure drop, and techno-economic feasibility. Findings indicate that nanofluids, especially metal-oxide and hybrid formulations, can substantially enhance thermal conductivity and heat transfer performance, with TiO₂- and CuO-based nanofluids showing the most promising results. However, challenges remain in optimizing concentration, ensuring stability, and mitigating increased pumping power. Overall, this review provides a consolidated understanding of existing research and highlights key directions for future development to improve heat extraction efficiency in geothermal systems utilizing abandoned wells.
References
Adun, H., Wole-Osho, I., Okonkwo, E. C., Kavaz, D., & Dagbasi, M. (2021). A critical review of specific heat capacity of hybrid nanofluids for thermal energy applications. Journal of Molecular Liquids, 340, 116890. https://doi.org/10.1016/j.molliq.2021.116890
Akbari, O. A., Toghraie, D., Karimipour, A., Marzban, A., & Ahmadi, G. R. (2016). The effect of velocity and dimension of solid nanoparticles on heat transfer in non-Newtonian nanofluid. The Effect of Velocity and Dimension of Solid Nanoparticles on Heat Transfer in Non-Newtonian Nanofluid, Numerical simulation Nanofluid Carboxy methyl cellulose Microchannel.
Akhgar, A., & Toghraie, D. (2018). An experimental study on the stability and thermal conductivity of water-ethylene glycol/TiO2-MWCNTs hybrid nanofluid: Developing a new correlation. In Powder Technology (Vol. 338, pp. 806–818). https://doi.org/10.1016/j.powtec.2018.07.086
Alimonti, C., & Soldo, E. (2016). Study of geothermal power generation from a very deep oil well with a wellbore heat exchanger. Renewable Energy, 86, 292–301. https://doi.org/10.1016/j.renene.2015.08.031
Allahvirdizadeh, P. (2020). A review on geothermal wells: Well integrity issues. Journal of Cleaner Production, 275, 124009. https://doi.org/10.1016/j.jclepro.2020.124009
Almanassra, I. W., Manasrah, A. D., Al-Mubaiyedh, U. A., Al-Ansari, T., Malaibari, Z. O., & Atieh, M. A. (2020). An experimental study on stability and thermal conductivity of water/CNTs nanofluids using different surfactants: A comparison study. Journal of Molecular Liquids, 304, 111025. https://doi.org/10.1016/j.molliq.2019.111025
Andriani, Y., Handoyo, E., Chairuna, A., & Widiyanto, G. (2022). Pengembangan Metoda Eksplorasi Geokimia Merkuri Arsenik Dan H2S Di Daerah Prospek Geothermal Dan Uji Validasinya. LEMBARAN PUBLIKASI MINYAK DAN GAS BUMI (LPMGB), 56(2), 111–122. https://doi.org/10.29017/LPMGB.56.2.1175
Armstrong, M., Sivasubramanian, M., & Selvapalam, N. (2021). Experimental investigation on the heat transfer performance analysis in silver nano-coated double pipe heat exchanger using displacement reaction. Materials Today: Proceedings, 45, 2482–2490. https://doi.org/10.1016/j.matpr.2020.11.100
Asadi, A., Pourfattah, F., Miklós Szilágyi, I., Afrand, M., Żyła, G., Seon Ahn, H., Wongwises, S., Minh Nguyen, H., Arabkoohsar, A., & Mahian, O. (2019). Effect of sonication characteristics on stability, thermophysical properties, and heat transfer of nanofluids: A comprehensive review. Ultrasonics Sonochemistry, 58(July). https://doi.org/10.1016/j.ultsonch.2019.104701
Beier, R. A., Acuña, J., Mogensen, P., & Palm, B. (2012). Vertical temperature profiles and borehole resistance in a U-tube borehole heat exchanger. Geothermics, 44, 23–32. https://doi.org/10.1016/j.geothermics.2012.06.001
Beier, R. A., Acuña, J., Mogensen, P., & Palm, B. (2014). Transient heat transfer in a coaxial borehole heat exchanger. Geothermics, 51, 470–482. https://doi.org/10.1016/j.geothermics.2014.02.006
Bottini, J. L., Zhu, L., Ooi, Z. J., Zhang, T., & Brooks, C. S. (2020). Experimental study of boiling flow in a vertical heated annulus with local two-phase measurements and visualization. International Journal of Heat and Mass Transfer, 155, 119712. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119712
Bu, X., Ma, W., & Li, H. (2012). Geothermal energy production utilizing abandoned oil and gas wells. Renewable Energy, 41, 80–85. https://doi.org/10.1016/j.renene.2011.10.009
Candra, A. D., Agin, L. F. P., & Abi Wicaksono, W. P. (2025). Quantitative Assessment of Calcite Scaling of A Vapour-Dominated Well. Scientific Contributions Oil and Gas, 48(4), 391–403. https://doi.org/10.29017/scog.v48i4.1861
Caulk, R. A., & Tomac, I. (2017). Reuse of abandoned oil and gas wells for geothermal energy production. Renewable Energy, 112, 388–397. https://doi.org/10.1016/j.renene.2017.05.042
Chakraborty, S. (2019). An investigation on the long-term stability of TiO2 nanofluid. Materials Today: Proceedings, 11, 714–718. https://doi.org/10.1016/j.matpr.2019.03.032
Chakraborty, S., & Panigrahi, P. K. (2020). Stability of nanofluid: A review. Applied Thermal Engineering, 174(December 2019). https://doi.org/10.1016/j.applthermaleng.2020.115259
Chen, K., Zheng, J., Li, J., Shao, J., & Zhang, Q. (2022). Numerical study on the heat performance of enhanced coaxial borehole heat exchanger and double U borehole heat exchanger. Applied Thermal Engineering, 203(August 2021), 117916. https://doi.org/10.1016/j.applthermaleng.2021.117916
Cheng, S. W. Y., Kurnia, J. C., Ghoreishi-Madiseh, S. A., & Sasmito, A. P. (2019). Optimization of geothermal energy extraction from abandoned oil well with a novel well bottom curvature design utilizing Taguchi method. Energy, 188, 116098. https://doi.org/10.1016/j.energy.2019.116098
Cheng, W. L., Li, T. T., Nian, Y. Le, & Wang, C. L. (2013). Studies on geothermal power generation using abandoned oil wells. Energy, 59, 248–254. https://doi.org/10.1016/j.energy.2013.07.008
Cheng, W. L., Li, T. T., Nian, Y. Le, & Xie, K. (2014). Evaluation of working fluids for geothermal power generation from abandoned oil wells. Applied Energy, 118, 238–245. https://doi.org/10.1016/j.apenergy.2013.12.039
Ciriaco, A. E., Zarrouk, S. J., & Zakeri, G. (2020). Geothermal resource and reserve assessment methodology: Overview, analysis and future directions. Renewable and Sustainable Energy Reviews, 119(February 2019), 109515. https://doi.org/10.1016/j.rser.2019.109515
Córcoles, J. I., Moya-Rico, J. D., Molina, A. E., & Almendros-Ibáñez, J. A. (2020). Numerical and experimental study of the heat transfer process in a double pipe heat exchanger with inner corrugated tubes. International Journal of Thermal Sciences, 158(July). https://doi.org/10.1016/j.ijthermalsci.2020.106526
Daneshipour, M., & Rafee, R. (2017). Nanofluids as the circuit fluids of the geothermal borehole heat exchangers. International Communications in Heat and Mass Transfer, 81, 34–41. https://doi.org/10.1016/j.icheatmasstransfer.2016.12.002
Das, P. K., Mallik, A. K., Ganguly, R., & Santra, A. K. (2016). Synthesis and characterization of TiO2-water nanofluids with different surfactants. International Communications in Heat and Mass Transfer, 75, 341–348. https://doi.org/10.1016/j.icheatmasstransfer.2016.05.011
Dhinesh Kumar, D., & Valan Arasu, A. (2018). A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids. Renewable and Sustainable Energy Reviews, 81(July 2017), 1669–1689. https://doi.org/10.1016/j.rser.2017.05.257
Gharibi, S., Mortezazadeh, E., Hashemi Aghcheh Bodi, S. J., & Vatani, A. (2018). Feasibility study of geothermal heat extraction from abandoned oil wells using a U-tube heat exchanger. Energy, 153, 554–567. https://doi.org/10.1016/j.energy.2018.04.003
Gonçalves, I., Souza, R., Coutinho, G., Miranda, J., Moita, A., Pereira, J. E., Moreira, A., & Lima, R. (2021). Thermal conductivity of nanofluids: A review on prediction models, controversies and challenges. Applied Sciences (Switzerland), 11(6). https://doi.org/10.3390/app11062525
Gordon, D., Bolisetti, T., Ting, D. S. K., & Reitsma, S. (2018). Experimental and analytical investigation on pipe sizes for a coaxial borehole heat exchanger. Renewable Energy, 115, 946–953. https://doi.org/10.1016/j.renene.2017.08.088
Harris, B. E., Lightstone, M. F., & Reitsma, S. (2021). A numerical investigation into the use of directionally drilled wells for the extraction of geothermal energy from abandoned oil and gas wells. Geothermics, 90(May 2020), 101994. https://doi.org/10.1016/j.geothermics.2020.101994
Hasibuan, M. Y., Fitrianti, F., & Adiyatama, D. (2020). Desain Program Pengeboran Eksplorasi Lapangan Panas Bumi Menggunakan Metode Slimhole Continuous Coring. Lembaran Publikasi Minyak Dan Gas Bumi, 54(1), 49–63. https://doi.org/10.29017/LPMGB.54.1.503
Hegde, R., Rao, S. S., & Reddy, R. P. (2010). Critical heat flux enhancement in pool boiling using alumina nanofluids. Heat Transfer - Asian Research, 39(5), 323–331. https://doi.org/10.1002/htj.20301
Hozien, O., El-Maghlany, W. M., Sorour, M. M., & Mohamed, Y. S. (2021). Experimental study on heat transfer and pressure drop characteristics utilizing three types of water based nanofluids in a helical coil under isothermal boundary condition. Journal of the Taiwan Institute of Chemical Engineers, 128, 237–252. https://doi.org/10.1016/j.jtice.2021.08.028
Hu, X., Banks, J., Guo, Y., & Liu, W. V. (2021). Retrofitting abandoned petroleum wells as doublet deep borehole heat exchangers for geothermal energy production—a numerical investigation. Renewable Energy, 176, 115–134. https://doi.org/10.1016/j.renene.2021.05.061
Hu, X., Banks, J., Wu, L., & Liu, W. V. (2020). Numerical modeling of a coaxial borehole heat exchanger to exploit geothermal energy from abandoned petroleum wells in Hinton, Alberta. Renewable Energy, 148, 1110–1123. https://doi.org/10.1016/j.renene.2019.09.141
Husen, M. (1995). Utilization of Remotely Sensed Data to Geothermal, Oil and Gas Development. Scientific Contributions Oil and Gas, 18(1), 33–40. https://doi.org/10.29017/SCOG.18.1.1103
Jalili, P., Ganji, D. D., & Nourazar, S. S. (2018). Investigation of convective-conductive heat transfer in geothermal system. Results in Physics, 10(June), 568–587. https://doi.org/10.1016/j.rinp.2018.06.047
Jama, M., Singh, T., Gamaleldin, S. M., Koc, M., Samara, A., Isaifan, R. J., & Atieh, M. A. (2016). Critical Review on Nanofluids: Preparation, Characterization, and Applications. Journal of Nanomaterials, 2016. https://doi.org/10.1155/2016/6717624
Jhia, Z., Zhu, L., Bottini, J. L., & Brooks, C. S. (2022). Identification of flow regimes in boiling flows in a vertical annulus channel with machine learning techniques. International Journal of Heat and Mass Transfer, 185, 122439. https://doi.org/10.1016/j.ijheatmasstransfer.2021.122439
Jia, G. S., Ma, Z. D., Xia, Z. H., Zhang, Y. P., Xue, Y. Z., Chai, J. C., & Jin, L. W. (2022). A finite-volume method for full-scale simulations of coaxial borehole heat exchangers with different structural parameters, geological and operating conditions. Renewable Energy, 182, 296–313. https://doi.org/10.1016/j.renene.2021.10.017
Khodadadi, H., Toghraie, D., & Karimipour, A. (2019). Effects of nanoparticles to present a statistical model for the viscosity of MgO-Water nanofluid. Powder Technology, 342, 166–180. https://doi.org/10.1016/j.powtec.2018.09.076
Kristiawan, B., Rifa’i, A. I., Enoki, K., Wijayanta, A. T., & Miyazaki, T. (2020). Enhancing the thermal performance of TiO2/water nanofluids flowing in a helical microfin tube. In Powder Technology (Vol. 376, pp. 254–262). Elsevier B.V. https://doi.org/10.1016/j.powtec.2020.08.020
Kujawa, T., Nowak, W., & Stachel, A. A. (2006). Utilization of existing deep geological wells for acquisitions of geothermal energy. Energy, 31(5), 650–664. https://doi.org/10.1016/j.energy.2005.05.002
Kumar, A., & Hardik, B. K. (2022). Heat transfer distribution and pressure fluctuations during flow boiling in a pipe with different orientations. Applied Thermal Engineering, 201(PB), 117822. https://doi.org/10.1016/j.applthermaleng.2021.117822
Kurnia, J. C., Putra, Z. A., Muraza, O., Ghoreishi-Madiseh, S. A., & Sasmito, A. P. (2021). Numerical evaluation, process design and techno-economic analysis of geothermal energy extraction from abandoned oil wells in Malaysia. Renewable Energy, 175, 868–879. https://doi.org/10.1016/j.renene.2021.05.031
Li, C., Guan, Y., Yang, R., Lu, X., Xiong, W., & Long, A. (2020). Effect of inner pipe type on the heat transfer performance of deep-buried coaxial double-pipe heat exchangers. Renewable Energy, 145, 1049–1060. https://doi.org/10.1016/j.renene.2019.06.101
Lin, Y., Luo, Y., Li, J., & Li, W. (2021). Heat transfer, pressure drop and flow patterns of flow boiling on heterogeneous wetting surface in a vertical narrow microchannel. International Journal of Heat and Mass Transfer, 172, 121158. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121158
Liu, J., Liu, J., Li, R., & Xu, X. (2018). Experimental study on flow boiling characteristics in a high aspect ratio vertical rectangular mini-channel under low heat and mass flux. Experimental Thermal and Fluid Science, 98(January), 146–157. https://doi.org/10.1016/j.expthermflusci.2018.05.019
Lyu, Z., Song, X., Li, G., Hu, X., Shi, Y., & Xu, Z. (2017). Numerical analysis of characteristics of a single U-tube downhole heat exchanger in the borehole for geothermal wells. Energy, 125, 186–196. https://doi.org/10.1016/j.energy.2017.02.125
Menni, Y., Chamkha, A. J., & Ameur, H. (2020). Advances of nanofluids in heat exchangers—A review. Heat Transfer, 49(8), 4321–4349. https://doi.org/10.1002/htj.21829
Minea, A. A. (2017). Hybrid nanofluids based on Al2O3, TiO2 and SiO2: Numerical evaluation of different approaches. International Journal of Heat and Mass Transfer, 104, 852–860. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.012
Mohamed, A., Salehi, S., & Ahmed, R. (2021). Significance and complications of drilling fluid rheology in geothermal drilling: A review. Geothermics, 93(December 2020), 102066. https://doi.org/10.1016/j.geothermics.2021.102066
Morchio, S., Fossa, M., & Beier, R. A. (2022). Study on the best heat transfer rate in thermal response test experiments with coaxial and U-pipe borehole heat exchangers. Applied Thermal Engineering, 200(August 2021), 117621. https://doi.org/10.1016/j.applthermaleng.2021.117621
Muneeshwaran, M., Srinivasan, G., Muthukumar, P., & Wang, C. C. (2021). Role of hybrid-nanofluid in heat transfer enhancement – A review. International Communications in Heat and Mass Transfer, 125(May), 105341. https://doi.org/10.1016/j.icheatmasstransfer.2021.105341
Nian, Y. Le, & Cheng, W. L. (2018a). Evaluation of geothermal heating from abandoned oil wells. Energy, 142, 592–607. https://doi.org/10.1016/j.energy.2017.10.062
Nian, Y. Le, & Cheng, W. L. (2018b). Insights into geothermal utilization of abandoned oil and gas wells. Renewable and Sustainable Energy Reviews, 87(February), 44–60. https://doi.org/10.1016/j.rser.2018.02.004
Noorollahi, Y., Pourarshad, M., Jalilinasrabady, S., & Yousefi, H. (2015). Numerical simulation of power production from abandoned oil wells in Ahwaz oil field in southern Iran. Geothermics, 55, 16–23. https://doi.org/10.1016/j.geothermics.2015.01.008
Piasecka, M., Strąk, K., & Maciejewska, B. (2021). Heat transfer characteristics during flow along horizontal and vertical minichannels. International Journal of Multiphase Flow, 137. https://doi.org/10.1016/j.ijmultiphaseflow.2021.103559
Rahmati, A. R., Akbari, O. A., Marzban, A., Toghraie, D., Karimi, R., & Pourfattah, F. (2017). Simultaneous investigations the effects of non-Newtonian nanofluid flow in different volume fractions of solid nanoparticles with slip and no-slip boundary condition (pp. 263–277). Elsevier Ltd. https://doi.org/https://doi.org/10.1016/j.tsep.2017.12.006
Raj, B., Angayarkanni, S. A., & Philip, J. (2017). Nano fluids for Efficient Heat Transfer Applications. Nanotechnology for Energy Sustainability, First Edition, 997–1027.
Returi, M. C., Konijeti, R., & Dasore, A. (2019). Heat transfer enhancement using hybrid nanofluids in spiral plate heat exchangers. Heat Transfer - Asian Research, 48(7), 3128–3143. https://doi.org/10.1002/htj.21534
Rowi, K., Subagio, A., Taufiq, H. R., Azis, M. M., Prasetiyo, B. D., Sitompul, V., Paryoto, S., Winata, D. T., Diharja, T., & Yutaka, M. A. (2025). Synergy of Nano Silica and Anionic Surfactant Fluid as Chemical Enhanced Oil Recovery. Scientific Contributions Oil and Gas, 48(4), 275–291. https://doi.org/10.29017/scog.v48i4.1951
Singh Rajput, N., Dilipbhai Shukla, D., Ishan, L., & Seshu Madhav, K. (2019). Enhancement of Nusselt number by using Al2O3and TiO2Nanofluids in Heat Exchangers. Materials Today: Proceedings, 47, 6515–6521. https://doi.org/10.1016/j.matpr.2021.08.191
Soltani, O., & Akbari, M. (2016). Effects of temperature and particles concentration on the dynamic viscosity of MgO-MWCNT/ethylene glycol hybrid nanofluid: Experimental study. Physica E: Low-Dimensional Systems and Nanostructures, 84, 564–570. https://doi.org/10.1016/j.physe.2016.06.015
Song, X., Wang, G., Shi, Y., Li, R., Xu, Z., Zheng, R., Wang, Y., & Li, J. (2018). Numerical analysis of heat extraction performance of a deep coaxial borehole heat exchanger geothermal system. Energy, 164, 1298–1310. https://doi.org/10.1016/j.energy.2018.08.056
Stacy, S. C., Zhang, X., Pantoya, M., & Weeks, B. (2014). The effects of density on thermal conductivity and absorption coefficient for consolidated aluminum nanoparticles. International Journal of Heat and Mass Transfer, 73, 595–599. https://doi.org/10.1016/j.ijheatmasstransfer.2014.02.050
Suranta, B. Y., Rasyid, I., Sofyan, A., & Rahutama, A. (2023). Best Practices to Achieve Optimal Geothermal Drilling Performance in A Cost-Effective Manner: Case Study of the Fastest Geothermal Well Drilling in Java and Sumatra. Scientific Contributions Oil and Gas, 46(3), 161–171. https://doi.org/10.29017/SCOG.46.3.1591
Suresh, S., Venkitaraj, K. P., Selvakumar, P., & Chandrasekar, M. (2011). Synthesis of Al2O3-Cu/water hybrid nanofluids using two step method and its thermo physical properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 388(1–3), 41–48. https://doi.org/10.1016/j.colsurfa.2011.08.005
Tang, F., & Nowamooz, H. (2018). Long-term performance of a shallow borehole heat exchanger installed in a geothermal field of Alsace region. Renewable Energy, 128, 210–222. https://doi.org/10.1016/j.renene.2018.05.073
Templeton, J. D., Ghoreishi-Madiseh, S. A., Hassani, F., & Al-Khawaja, M. J. (2014). Abandoned petroleum wells as sustainable sources of geothermal energy. Energy, 70, 366–373. https://doi.org/10.1016/j.energy.2014.04.006
Vallejo, J. P., Prado, J. I., & Lugo, L. (2022). Hybrid or mono nanofluids for convective heat transfer applications. A critical review of experimental research. Applied Thermal Engineering, 203(November 2021), 117926. https://doi.org/10.1016/j.applthermaleng.2021.117926
Verma, S. K., & Tiwari, A. K. (2017). Characterization of Nanofluids as an advanced heat transporting medium for Energy Systems. Materials Today: Proceedings, 4(2), 4095–4103. https://doi.org/10.1016/j.matpr.2017.02.313
Wijanarko, E., Sunarjanto, D., & Nur, D. N. D. (2021). Identifikasi Struktur Geologi Bawah Permukaan Menggunakan Metode Horizontal Gradient, Euler Deconvolution and Second Vertical Derivative. Studi Eksplorasi Panas Bumi Baturaden, Jawa Tengah. LEMBARAN PUBLIKASI MINYAK DAN GAS BUMI (LPMGB), 55(1), 25–35. https://doi.org/10.29017/LPMGB.55.1.574
Zhang, H., Qing, S., Gui, Q., Zhang, X., & Zhang, A. (2022). Effects of surface modification and surfactants on stability and thermophysical properties of TiO2/water nanofluids. Journal of Molecular Liquids, 349, 118098. https://doi.org/10.1016/j.molliq.2021.118098
Zhong, D., Zhong, H., & Wen, T. (2020). Investigation on the thermal properties, heat transfer and flow performance of a highly self-dispersion TiO2 nanofluid in a multiport mini channel. International Communications in Heat and Mass Transfer, 117(July). https://doi.org/10.1016/j.icheatmasstransfer.2020.104783
Zhou, J., Ye, T., Zhang, D., Song, G., Sun, R., Deng, J., Tian, W., Su, G. H., & Qiu, S. (2021). Experimental study on vertically upward steam-water two-phase flow patterns in narrow rectangular channel. Nuclear Engineering and Technology, 53(1), 61–68. https://doi.org/10.1016/j.net.2020.06.003
Published
Issue
Section
License
Copyright (c) 2026 © Copyright by Authors. Published by LEMIGAS
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors are free to Share — copy and redistribute the material in any medium or format for any purpose, even commercially Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms, under the following terms Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
