DATA PREPARATION FOR AN ACCURATE ENHANCED OIL RECOVERY LABORATORY TEST BY USING SURFACTANT FLOODING METHOD

Tjuwati Makmur

Abstract


In preparation of the study, x core plugs are drilled. Determination of basic parameter and identification of core plug sample are carried out following the API-RP 40. For example, the tests of physical properties, i.e. grain density (gr/cc), weight, grain volume (cc), pore volume (cc), posority (%), and air permeability (Ka.mD).


Keywords


Oil Recovery, Laboratory, Surfactant Flooding

Full Text:

PDF

References


Amyx, J.W, Bass, D.M.Jr., and Whiting, R.L: “Petroleum Reservoir Engineering”, McGraw-Hill Book Co.Inc., New York City, 1960.

Buckley, S.E and Leverett, M.C.: “Mechanism of Fluid Displacement in Sands”, Trans, AIME 146, p. 107-116, 1924.

Spencer O.F; “Secondary Recovery of Oil” The Pennsylvania State University, Pennsylvania, USA, p. 22-75, 1959.

American Petroleum Institute, API - RP 45

Charles, R.S.: “Secondary Oil Recovery”, Lition Educational Publishing, INC. Florida, p.183 – 224, 1966.




DOI: https://doi.org/10.29017/SCOG.28.2.1060

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.